High Strength Tracer Wire Manufacturer CCS 12 GA 1230 1245

12 GA High Strength Tracer Wire

Item Number:

Model: Tracer Wire
Size: 12GA, 12AWG, 12Gauge
Color: Yellow, Orange, Blue, Custom
Insulation: HDPE, HMWPE
Shield: None
Jacket: None
Packing: 2500FT/Wooden Reel
OD: 30mils, 45mils
Conductor Material: CCS
Drain wire: None

General Specifications:

Cable Type

Tracer wire

Pairs, quantity
Single Core

Cable Component Type
Horizontal/HDPE/HMWPE

Conductor Gauge, singles
12AWG/12GA

Conductor Type singles
Solid

Characteristics:

Strength & Flexibility: Strong enough for underground use while being flexible for easier handling during installation.
Good Signal Performance: Adequate conductivity for efficient signal transmission over medium to long distances.
Cost Efficiency: Lower material cost compared to solid copper wire.
Versatility: Suitable for a wide range of utility tracing applications.
Corrosion Protection: Copper cladding ensures resistance to environmental factors, extending the life of the wire.

In general, the 12GA CCS tracer wire is a reliable, cost-effective, and durable solution for underground utility locating, offering long-term performance and enhanced safety in diverse applications

None

Specifications
Item	12GA tracer wire
Conductor Type	Copepr Clad Steel/CCS
Average Break Load	452 LBS
Minimum Elongation	＞10%
Nominal Copper Thickness (% of Diameter)	3 %
Nominal Copper Weight	13%
Minimum Tensile Strength	67,000 psi
Nominal DC Resistance (ohms/1000 ft.)	7.564
Temper	Dead Soft Annealed (DSA)

Description

What is CCS tracer wire?

CCS tracer wire refers to a type of wire used in underground utility detection and tracing. "CCS" stands for Copper Clad Steel, which means the wire is made of a steel core coated with a thin layer of copper. This combination provides the strength of steel with the conductivity of copper.

CCS tracer wire is often used in conjunction with a locator tool to help identify and map the location of buried utilities such as gas, water, or electrical lines. The copper layer allows the wire to conduct electrical signals, which can then be detected by the locator. It’s durable, corrosion-resistant, and ideal for long-term use in harsh underground environments.

What is the best wire for a tracer wire?

The best wire for a tracer wire depends on the specific application and environmental conditions, but typically, the following options are preferred:

Copper Clad Steel (CCS) Tracer Wire:

This is the most commonly used material for tracer wires. The copper coating provides good conductivity, while the steel core offers strength and resistance to breakage. CCS wire is durable, corrosion-resistant, and cost-effective, making it ideal for most underground utility installations.

Solid Copper Tracer Wire:

Solid copper wire offers the best conductivity compared to CCS wire. It's ideal in applications where high conductivity is crucial, but it's less durable than CCS wire and can be more expensive. It’s best used in areas with minimal risk of physical damage.

High Strength CCS Steel Tracer Wire:

For high-stress installations, such as areas with high traffic or potential for physical damage, using a high-strength steel wire with a copper coating offers a good balance of strength and conductivity.

In summary, CCS tracer wire is often considered the best choice for most general applications due to its combination of strength, corrosion resistance, and conductivity.

12GA CCS tracer wire

why we choose 12GA CCS tracer wire

Strength and Durability: 12 AWG wire offers a good balance of strength and flexibility. It's thick enough to resist damage from environmental stresses like abrasion, pressure from soil movement, and accidental impacts while still being manageable for installation.
Corrosion Resistance: The CCS construction (steel core with a copper coating) provides both the strength of steel and the corrosion resistance of copper. This is important in underground applications where the wire might be exposed to moisture, chemicals, or other corrosive elements.
Signal Conductivity: Copper has excellent electrical conductivity, making it suitable for carrying the signal used by utility locators. The 12 AWG wire ensures strong signal transmission over longer distances without significant loss.
Standardization: 12 AWG is a widely accepted standard for tracer wires, striking a balance between ease of use, strength, and conductivity. It's suitable for various underground applications such as water, gas, and electrical lines.
Cost-Effective: Compared to thicker gauges, 12 AWG wire is relatively affordable while still offering the necessary performance characteristics for most utility tracing needs.
Overall, 12 AWG CCS tracer wire is commonly chosen for its optimal combination of strength, durability, signal transmission capabilities, and cost-effectiveness.

tracer wire manufacturer